Add a Port/Aircraft Restriction

Owned by Barb Gwilliam (Deactivated)
Last updated: 06/03/2017 by Oliver Santos (Deactivated)
2 min read

Port/Aircraft Restrictions give operations officer the visibility of seeing violations generated by the restriction framework within the Monitoring panel.

Ongoing Changes

Port/ Aircraft Restriction will also be available in AircraftFollow.


Step-by-step guide

  1. Set Port Restriction to Critical. 

    Inviolate and Management settings allow no one to override it. These settings can be set lower if you wish to have another rule which is overridable.




  2. To set up the groups for the rule in Configure, click on Port/route>  Port> Port Attribute.

  3. Once in the screen, click Add.  For example, set ETOPS as the attribute for the PORT, this will allow you to mark any PORT as requiring ETOPS.



  4. Click Port under Port/Route.

  5. Select a Port.

  6. Expand the option by clicking + and go to Attribute(s).



  7.  Select ETOPS.

  8.  Click Save.



  9. Proceed to Equipment> Equipment Profile to group specific aircrafts to be included in the port restriction.





  10. Select Equipment> Equipment Registration> Profile.



  11. Add a line and select the aircraft for the Equipment Profile.




  12.  Select the dates.

  13.  Click Save.


Note

After the rule has been set up, sign-out and then back in. The job engine also needs to run before the rule will activate, this can take up to 30 minutes or so depending on the settings in your job engine.


Once you have assigned a crew, a pop-up window will display in the monitoring panel.